LeetCode 401. Binary Watch
欢迎来到阿八个人博客网站。本 阿八个人博客 网站提供最新的站长新闻,各种互联网资讯。 喜欢本站的朋友可以收藏本站,或者加QQ:我们大家一起来交流技术! URL链接:https://www.abboke.com/jsh/2019/0906/111503.html
Description
A binary watch has 4 LEDs on the top which represent the hours (0-11), and the 6 LEDs on the bottom represent the minutes (0-59).
Each LED represents a zero or one, with the least significant bit on the right.
For example, the above binary watch reads "3:25".
Given a non-negative integer n which represents the number of LEDs that are currently on, return all possible times the watch could represent.
Example:
Note:
The order of output does not matter.
The hour must not contain a leading zero, for example "01:00" is not valid, it should be "1:00".
The minute must be consist of two digits and may contain a leading zero, for example "10:2" is not valid, it should be "10:02".
描述
二进制手表顶部有 4 个 LED 代表小时(0-11),底部的 6 个 LED 代表分钟(0-59)。
每个 LED 代表一个 0 或 1,最低位在右侧。
例如,上面的二进制手表读取 “3:25”。
给定一个非负整数 n 代表当前 LED 亮着的数量,返回所有可能的时间。
案例:
注意事项:
输出的顺序没有要求。
小时不会以零开头,比如 “01:00” 是不允许的,应为 “1:00”。
分钟必须由两位数组成,可能会以零开头,比如 “10:2” 是无效的,应为 “10:02”。
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/probl...
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
思路
对每个位置编号 (范围是 [0,9],一共 10 个位置),形成键值对;键位编号,值表盘对应的时间。其中,对分钟用 range(0,6) 进行编号;小时用 range(6,10) 进行编号;对于输入 num,使用 Python 的 combinations 模块,从 list(range(10)) 中随机选取 num 个数字;然后以这些数字为键,拿到对应的小时和分钟数,构成当前时间;对于不符合要求的时间直接丢弃;
源代码文件在 这里 。
©本文首发于 何睿的博客 ,欢迎转载,转载需保留 文章来源 ,作者信息和本声明.